Black Brant II Model Rocket Kit (Estes)
The Black Brant II was the second in the series of Canadian Black Brant sounding rockets and first flew in 1960.
This 1/13 scale model is a recent re-release of a popular Estes model from the 1990's. It features laser-cut wood fins, plastic nose cone and tail cone, waterslide decals and 18" parachute recovery. This high-flyer is estimated to reach altitudes of 1,300 feet!
Specifications:
Length: 24.9"/63.3 cm
Diameter: 1.33"/33.8 mm
Approx. Weight: 3 oz/85 gm
Parachute Recovery
Scale: approx. 1/13
Skill Level 3
Recommended Engines: D12-5; D12-7
Requires 3/16" launch rod
What you'll need to build this model:
Scissors, Pencil, Ruler, Fine Sandpaper, Carpenter's Glue, Plastic Cement, Hobby Knife, Masking Tape, Paint: Primer, Black, White, and Clear.
What else you'll need to fly this model:
Electronic launch system; launch pad with 3/16" launch rod; recovery wadding; engines (see list of recommended engines above).
This 1/13 scale model is a recent re-release of a popular Estes model from the 1990's. It features laser-cut wood fins, plastic nose cone and tail cone, waterslide decals and 18" parachute recovery. This high-flyer is estimated to reach altitudes of 1,300 feet!
Specifications:
Length: 24.9"/63.3 cm
Diameter: 1.33"/33.8 mm
Approx. Weight: 3 oz/85 gm
Parachute Recovery
Scale: approx. 1/13
Skill Level 3
Recommended Engines: D12-5; D12-7
Requires 3/16" launch rod
What you'll need to build this model:
Scissors, Pencil, Ruler, Fine Sandpaper, Carpenter's Glue, Plastic Cement, Hobby Knife, Masking Tape, Paint: Primer, Black, White, and Clear.
What else you'll need to fly this model:
Electronic launch system; launch pad with 3/16" launch rod; recovery wadding; engines (see list of recommended engines above).
Related Items
Porta-Pad® II Launch Pad and Electron Beam® Launch Controller Set (Estes)
Electronic Launch System with Launch Pad