
Black Brant III Model Rocket Kit (Estes)
The Black Brant III is a scale model of the primary research vehicle produced by Canada Bristol Aerospace. This recent re-release from Estes features laser-cut wood fins, plastic nose cone, waterslide decals and 12" parachute recovery.
Specifications:
Length: 20.4"/51.8 cm
Diameter: 0.98"/25 mm
Approx. Weight: 1.3 oz/36.9 gm
Parachute Recovery
Scale: approx. 1/34
Skill Level 2
Recommended Engines: 1/2A6-2, A8-3 (first flight), A8-5, B4-4, B6-4, B6-6, C6-5, C6-7
What you'll need to build this model:
Scissors, Pencil, Ruler, Fine Sandpaper, Carpenter's Glue, Plastic Cement, Hobby Knife, Masking Tape, Paint: Primer, Red, Black, Silver and White, and Clear.
What else you'll need to fly this model:
Electronic launch system; launch pad with 1/8" launch rod; recovery wadding; engines (see list of recommended engines above).
Specifications:
Length: 20.4"/51.8 cm
Diameter: 0.98"/25 mm
Approx. Weight: 1.3 oz/36.9 gm
Parachute Recovery
Scale: approx. 1/34
Skill Level 2
Recommended Engines: 1/2A6-2, A8-3 (first flight), A8-5, B4-4, B6-4, B6-6, C6-5, C6-7
What you'll need to build this model:
Scissors, Pencil, Ruler, Fine Sandpaper, Carpenter's Glue, Plastic Cement, Hobby Knife, Masking Tape, Paint: Primer, Red, Black, Silver and White, and Clear.
What else you'll need to fly this model:
Electronic launch system; launch pad with 1/8" launch rod; recovery wadding; engines (see list of recommended engines above).