Message sent. Thank you for sharing this product with your friends!
Blue Jay™ Boost Glider Model Rocket Kit (Semroc)
Boost Glider Model Rocket Kit for 18mm Engines. Laser-cut balsa parts. The model soars upward under rocket power then the pod separates to come down on a streamer while the main section gracefully glides to the ground to fly again!
This is a fairly easy to build Boost Glider ("BG") that is similar to the old Edmunds "Deltie" design. While not strictly a "competition-style" BG kit, this model can put in good times if you're looking for a simple glider to use in NAR competition.
Length: 13.75 in/34.93 cm
Body Diameter: 0.73 in/18.5 mm
Length: 16 in/40.64 cm
Wingspan: 13.5 in/34.3 cm
Approx. Weight: 1.4 oz/39.7g
Manufacturers Skill Level 2 (out of 5)
Glider Recovery (Streamer Recovery on Pop Pod)
Recommended Engines: B4-2; B6-2; C6-3
What else you'll need to build this model:
Scissors; Hobby Knife; Ruler; Adhesives (Wood Glue or CA); Sandpaper; Masking Tape.
What else you'll need to fly this model:
Electronic launch system; launch pad with 1/8" launch rod; recovery wadding; engines (see list of recommended engines above).