1/2A3-2T Model Rocket Engines
4 Pack, 13mm diameter
Firestreak SST Snap-Together Rocket Kit (Estes)
Easy to build (no glue required) model rocket from Estes. The Firestreak SST is a sharp little rocket that snaps together. Reaching altitudes up to 350 feet, you can launch it with "Mini" size A engines and it recovers with a streamer, so this is a good choice for flying on smaller fields.
The components are pre-finished, there’s no sanding or painting required and it comes with self-adhesive decals.
Specifications:
Length: 10.2 in (25.9 cm)
Diameter: 0.86 in (22 mm)
Estimated Weight: 1.1 oz (31.2 g)
Recommended Engines: 1/2A3-2T, 1/2A3-4T, A3-4T, A10-3T
Projected Max Altitude: 350 ft (107 m)
What else you'll need to build this rocket:
Snap together construction. Clear tape and a pen or pencil may be needed.
What else you'll need to fly this rocket:
Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad with 1/8" Launch Rod.
The components are pre-finished, there’s no sanding or painting required and it comes with self-adhesive decals.
Specifications:
Length: 10.2 in (25.9 cm)
Diameter: 0.86 in (22 mm)
Estimated Weight: 1.1 oz (31.2 g)
Recommended Engines: 1/2A3-2T, 1/2A3-4T, A3-4T, A10-3T
Projected Max Altitude: 350 ft (107 m)
What else you'll need to build this rocket:
Snap together construction. Clear tape and a pen or pencil may be needed.
What else you'll need to fly this rocket:
Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad with 1/8" Launch Rod.
Related Items
Porta-Pad® II Launch Pad and Electron Beam® Launch Controller Set (Estes)
Electronic Launch System with Launch Pad