Kits YOU Build!


Green Eggs™ Egglofter Kit (Estes)

SKU:
KEGREGG-24



Price: $23.99 each

Quantity:




This Egg lofting rocket from Estes is designed for 24mm engines and can be flown with or without an egg.

Clear payload is big enough to carry TWO eggs! (with a
D12-3 engine). Swept fins allow the rocket to stand by itself. The main body tube and clear payload section are both the same diameter allowing a standard launch lug to be glued into place with no stand-off needed. Through the wall thick balsa fins make for easier alignment and strength.

Not exactly a competition-style kit, but in a pinch could be used as a "qualifier" model for C or D Eggloft in NAR competition.

Specifications:

Length: 23.6 in/60 cm
Diameter: 1.8 in/46 mm
Approx. Weight: 3.5 oz/99 g
Parachute Recovery
Skill Level Intermediate
Requires 3/16" Launch Rod
Recommended Engines: Without egg: C11-5; D12-5; D12-7. With egg: C11-3; C11-5; D12-5.

What else you'll need to fly this model:

Electronic launch system; launch pad with 3/16" launch rod; engines (see list of recommended engines above), recovery wadding.

What you'll need to build this model:

Scissors, pencil, ruler, fine sandpaper, carpenter’s wood glue, sanding block, hobby knife, masking tape, clear tape, primer, paint and clear coat (as desired, optional). Tools, construction and finishing supplies not included.