Message sent. Thank you for sharing this product with your friends!
Gryphon Boost Glider Model Rocket Kit (Estes)
Boost GliderModel Rocket Kit for 13mm Engines. This new kit from Estes features laser-cut balsa parts and should make a good first or second glider kit for the intermediate modeler. The model flies upward under rocket power then the pod separates to come down on a streamer while the canard-style glider soars back to the ground to fly again!
Specifications:
Length: 18 in/45.7 cm
Body Diameter: 0.54 in/13.7 mm
Glider Wingspan: 6 in/16.2 cm
Approx. Weight: 0.6 oz/17g Manufacturers Skill Level: Intermediate Glider Recovery (Streamer Recovery on Pop Pod)
Recommended Engines: 1/2A3-2T; A3-4T; A10-3T
What you'll need to build this model:
Scissors, Pencil, Ruler, Wax Paper, Fine Sandpaper, Carpenter's (Wood) Glue, Hobby Knife, Masking Tape, Clear Tape, Paint (optional): Primer, Gray, White, and Clear.
What else you'll need to fly this model:
Electronic launch system; launch pad with 1/8" launch rod; recovery wadding; engines (see list of recommended engines above).