Kits YOU Build!


Micro Hawk Model Rocket Kit

SKU:
KHAWK-MM



Retail Price: $7.95
ASP Price: $6.95 each
You Save $1.00!

Quantity:




The Hawk (an acronym for "Homing All-the-Way Killer") was created for the US Army in 1954 and put into service in 1959. Designed as an anti-aircraft missile, the Hawk was also sold to many countries and later has been used as a sounding rocket for research.

This Micro kit is designed to use the Quest™ Micro Maxx™ engines and is based on our "Minimum Diameter" T-MM body tubes. Includes 3D printed nose cone, Kevlar® shock cord, metallized polyester streamer, water-slide decals and our usual complete instructions. Due to the small parts involved, these kits are not recommended for the first-time modeler. Younger modelers should have the assistance of an adult when trying to construct these small kits.

Specifications:

Length:
4.15"/ 105mm
Diameter: 0.282"/7.16 mm
Approx. Weight:
0.18 oz/5 gm
Skill Level: Intermediate
Scale:
1/50 (0.020)
Recovery Device: Streamer
Recommended Engines: Quest™ Micro Maxx™

What you'll need to build this model:

Adhesives (a quick-curing epoxy glue can be used for most steps and is recommended, cyanoacrylate [“CA”] is recommended for some steps and you may also use throughout if preferred); hobby knife with a sharp #11 blade; straight edge (preferably metal); cellophane ("Scotch") tape; double-sided cellophane ("Scotch") tape; paint (Spray or bottle paint, such as such as Rust-Oleum, Krylon, or Testors is recommended. Be sure not to mix different types or brands of paint without testing.) - primer (optional), white, black & clear (optional); sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil.
Recommended, but not required: tweezers (or needle nose pliers); sanding block; tack cloth; decal setting solution such as Micro Set or Micro Sol.

What else you'll need to fly this model:

Electronic launch system; launch pad with Micro Maxx™ size launch rod; recovery wadding; Micro Maxx™ engines.