Kits YOU Build!


Micro "That Tube Rocket!"

SKU:
KTTR-MM



Price: $6.95 each

Quantity:




How cute is this?! Tiny, tube-stabilized rocket that flies great! Our easiest Micro kit to build.

This Micro kit is designed to use the Quest™ Micro Maxx™ engines and is based on our "Minimum Diameter" T-MM body tubes. Includes 3D printed nose cone, Kevlar® shock cord, metallized polyester streamer, and our usual complete instructions. Younger modelers should have the assistance of an adult when trying to construct these small kits.

Specifications:

Length: 6.875"/174.6 mm
Diameter: 0.282"/7.16 mm
Approx. Weight: 0.21 oz/6 gm
Skill Level: Beginner/Intermediate
Recovery Device: Streamer
Recommended Engines: Quest™ Micro Maxx™

What you'll need to build this model:

Adhesives (cyanoacrylate [“CA”] can be used for all steps and is recommended, wood glue can also be used if preferred); hobby knife with a sharp #11 blade; tweezers; cellophane ("Scotch") tape; paint (Spray or bottle paint, such as such as Rust-Oleum, Krylon, or Testors is recommended. Be sure not to mix different types or brands of paint without testing.) - primer (optional), colors as desired & clear (optional); sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil.
Recommended, but not required: tack cloth.

What else you'll need to fly this model:

Electronic launch system; launch pad with Micro Maxx™ size launch rod; recovery wadding; Micro Maxx™ engines.