Kits YOU Build!

Neo Mighty Model Rocket Kit


Price: $24.95 each
  6+: 19.95 each
12+: 16.95 each
24+: 14.95 each


The newest addition to our "Neo" line of kits! Designed with the beginner in mind, especially if they are looking for a bit larger model to start with. The Neo Mighty features laser-cut balsa fins, balsa nose cone, clear payload section, quick-change engine hook & parachute recovery. Designed to fly on "Mighty" 24mm engines.

This is a great beginner's kit that's easy to build & fly. The fin design makes attachment and alignment extra-easy!  Even though we had the beginner in mind when designing this rocket, it's also a fun sport flier for modelers of any experience level.

This is a good model to use to learn basic rocketry techniques - we think the "Neo" series of kits are our best all-around kits for the novice. A great model for school or scout groups, especially with older modelers wanting a little more power! Economical bulk packaging is available. For the discounted quantities of 6 or more the kits are provided in bulk form with a single set of instructions (which may be photocopied if desired for each modeler). Parts for the kits are provided in bulk packing which you then distribute to the modellers, some items (shock cords, shroud lines, etc.) may also require cutting to length - see the "
Additional Instructions/Notes for Teachers/Group Leaders" link below for more details. Kits do not come individually bagged at the discounted bulk prices.


Length: 28"/71.1 cm
Diameter: 1.326"/33.7 mm
Approximate Weight: 3 oz/85 gm
15" Parachute Recovery
Recommended Engines: C11-5; D12-5; E20-7; with 18/24mm adapter (not included): C6-3; C12-6; D16-6
Skill Level: Beginner
Center of Pressure: 23" from tip of nose
Requires 3/16" Launch Rod

Estimated (calculated) altitudes:

with C11-5: 115 feet/35 meters
with D12-5: 320 feet/97.5 meters
with E20-7: 330 feet/100.5 meters
with C6-3: 1350 feet/411.5 meters
with C12-6: 1265 feet/385.5 meters
with D16-6: 1455 feet/443.5 meters

What you'll need to build this model:

Required: Adhesive (A wood glue, such as Elmer's Carpenters Glue or Titebond can be used for all steps and is recommended); sandpaper (medium - 220 or 280 grit); pencil or ball point pen; scissors; hobby knife; tape (cellophane, aka Scotch Tape, and/or masking).
Optional: sandpaper (fine - 320 or 400 grit, extra fine - 500 or 600 grit); sanding sealer (or balsa fillercoat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Rustoleum, Krylon or Testors is recommended. Be sure not to mix different types or brands of paint without testing.) - primer; colors as desired & clear; sanding block; tack cloth.

Check out our "Basic Building" Combos if you need a lot of the items above at a discounted price!

What you'll need to fly this model:

Electronic launch system; launch pad with 3/16" launch rod; recovery wadding; engines (see list of recommended engines above).

You can see the instruction sheets by clicking here.

Additional Instructions/Notes for Teachers/Group Leaders using bulk packs are here.

You can download extra copies of the tube marking guides for use with bulk packs by clicking here.