Basic Building Combo #1
The main things you need to build a basic kit
Neo Standard Starter Set
This Launch Set comes with our Neo Standard kit which we think is perhaps our best all-around kit for the novice.
Included launch system comes with an electronic launch system and a launch pad with 1/8" rod. There is also a three pack of Estes A8-3 engines and a package of recovery wadding included.
Please note: as this set contains engines we can only ship this item by ground to the Continental US and it may take longer in transit.
Rocket Specifications:
Length: 16.5"/41.9 cm
Diameter: 0.98"/24.9 mm
Weight: 1 oz/28 gm
12" Parachute Recovery
Recommended Engines: 1/2A6-2; A3-4; A8-3; B4-4; B6-4; C6-7; C12-6; D16-8
Skill Level: Beginner
Center of Pressure: 14" from tip of nose
Estimated (calculated) altitudes:
with 1/2A6-2: 115 feet/35 meters
with A3-4: 320 feet/97.5 meters
with A8-3: 330 feet/100.5 meters
with B4-4 (Estes): 695 feet/212 meters
with B4-4 (Quest Q-Jet): 720 feet/219.5 meters
with B6-4: 730 feet/222.5 meters
with C6-7: 1350 feet/411.5 meters
with C12-6: 1265 feet/385.5 meters
with D16-8: 1455 feet/443.5 meters
What you'll need to build this model:
Required: Adhesive (A wood glue, such as Elmer's Carpenters Glue or Titebond can be used for all steps and is recommended); sandpaper (medium - 220 or 280 grit); pencil or ball point pen; scissors; hobby knife; tape (cellophane, aka Scotch Tape, and/or masking).
Optional: sandpaper (fine - 320 or 400 grit, extra fine - 500 or 600 grit); sanding sealer (or balsa fillercoat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Krylon or Testors is recommended. Be sure not to mix different types or brands of paint without testing.) - primer; colors as desired & clear; sanding block; tack cloth.
Check out our "Basic Building" Combos if you need a lot of the items above at a discounted price!
What else you'll need to fly this rocket:
One 9V Alkaline Battery, additional Engines if desired (see list above)
Included launch system comes with an electronic launch system and a launch pad with 1/8" rod. There is also a three pack of Estes A8-3 engines and a package of recovery wadding included.
Please note: as this set contains engines we can only ship this item by ground to the Continental US and it may take longer in transit.
Rocket Specifications:
Length: 16.5"/41.9 cm
Diameter: 0.98"/24.9 mm
Weight: 1 oz/28 gm
12" Parachute Recovery
Recommended Engines: 1/2A6-2; A3-4; A8-3; B4-4; B6-4; C6-7; C12-6; D16-8
Skill Level: Beginner
Center of Pressure: 14" from tip of nose
Estimated (calculated) altitudes:
with 1/2A6-2: 115 feet/35 meters
with A3-4: 320 feet/97.5 meters
with A8-3: 330 feet/100.5 meters
with B4-4 (Estes): 695 feet/212 meters
with B4-4 (Quest Q-Jet): 720 feet/219.5 meters
with B6-4: 730 feet/222.5 meters
with C6-7: 1350 feet/411.5 meters
with C12-6: 1265 feet/385.5 meters
with D16-8: 1455 feet/443.5 meters
What you'll need to build this model:
Required: Adhesive (A wood glue, such as Elmer's Carpenters Glue or Titebond can be used for all steps and is recommended); sandpaper (medium - 220 or 280 grit); pencil or ball point pen; scissors; hobby knife; tape (cellophane, aka Scotch Tape, and/or masking).
Optional: sandpaper (fine - 320 or 400 grit, extra fine - 500 or 600 grit); sanding sealer (or balsa fillercoat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Krylon or Testors is recommended. Be sure not to mix different types or brands of paint without testing.) - primer; colors as desired & clear; sanding block; tack cloth.
Check out our "Basic Building" Combos if you need a lot of the items above at a discounted price!
What else you'll need to fly this rocket:
One 9V Alkaline Battery, additional Engines if desired (see list above)
Related Items
