Kits YOU Build!


Saturn 1B Kit (Estes)

SKU:
KES1B-24



Retail Price: $69.99
ASP Price: $59.99 each
You Save $10.00!

Quantity:




The Estes Saturn 1B SA-206 is a stunning 1:100 scale recreation of the Saturn 1B and Apollo spacecraft stack as it appeared in 1973 for the launch of the first Skylab crew. Every detail is there, from the Launch Escape System atop the Apollo Command and Service Module, to the first-stage H-1 engine nozzles (remove for launch). Textured body wraps, injection molded components, and other plastic formed parts add a level of realism to this Master-Level kit that every scale modeler will appreciate. On display or in the air, the Estes Saturn 1B is a marvelous addition to any fleet.

Specifications:

Length: 26.8"/68.1 cm
Diameter: 2.62"/67 mm
Weight: 6.9 oz/196 gm
Dual Parachute Recovery
Scale: approx. 1/100
Recommended Engines: C11-3; D12-3; E12-4, E12-6 (note that we do not carry these specific Estes E engines as they require Hazmat shipping, but this model should certainly be capable of flying well on several 24mm composite E engines that we do have available).
Recommended for very experienced modelers

What you'll need to build model:

Pencil, #220 #320 #400 and #600 sandpaper, CA, CA accelerator, epoxy, yellow glue, tube-type plastic cement, liquid plastic cement, putty for plastic models, sanding sealer, tweezers, hobby knife, sharp blades, masking tape, permanent spray adhesive (not artists’ or repositionable), paint (flat black, flat white, silver). Tools, construction and finishing supplies not included.

What else you'll need to fly this model:

Electronic launch system (depending on your engine choice, you may need one capable of igniting a composite engine); launch pad with 3/16" rod; recovery wadding; engines (see list of recommended engines above).