
T - 50 Wood Nose Cone "V2"
Model Rocket Nose Cone made from Balsa that fits T-50 size Body Tube. Has a hole bored in the base to allow for nose weight to be added if desired. Comes with a small ply bulkhead that can be glued inside the hole and to which you can attach a screw eye.
Cone Length: 3"
Shoulder Length: 0.5"
Approximate Weight*: 0.065 oz/1.84 gm
Hole Size: Approx 0.56" diameter and 2" deep
This is the same nose cone that comes in our 13mm V2 kit.
*As wood is a natural product the weight may vary somewhat from piece to piece.
Cone Length: 3"
Shoulder Length: 0.5"
Approximate Weight*: 0.065 oz/1.84 gm
Hole Size: Approx 0.56" diameter and 2" deep
This is the same nose cone that comes in our 13mm V2 kit.
*As wood is a natural product the weight may vary somewhat from piece to piece.