Message sent. Thank you for sharing this product with your friends!
Thermal Seeker 13 Parachute Duration Kit
This kit features a lightweight vac-form plastic cone, quality spiral-wound body tube, shock cord made of DuPont KEVLAR® & thin G10 fiberglass fins. Each kit comes with one of our "Hang Time" Competition Parachute kits made of thin 1/4 mil aluminized Mylar®. The parachute size included with each kit is a good all - around size for the model size, but you may want to use a larger or smaller size depending on flying conditions. To see other competition parachute sizes that are available click here.
Adhesives – thin viscosity cyanoacrylate ("CA") glue; hobby knife with a sharp #11 blade; sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil.
Recommended, but not required: sanding block; extender tip for cyanoacrylate glue.
Optional: accelerator for cyanoacrylate glue.
What else you'll need to fly this rocket:
Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad