Kits YOU Build!

Thermal Seeker 18 Parachute Duration Kit


Price: $17.95 each


This kit features a lightweight vac-form plastic cone, quality spiral-wound body tube, shock cord made of DuPont KEVLAR® & thin G10 fiberglass fins. Each kit comes with one of our "Hang Time" Competition Parachute kits made of thin 1/4 mil aluminized Mylar®. The parachute size included with each kit is a good all - around size for the model size, but you may want  to use a larger or smaller size depending on flying conditions. To see other competition parachute sizes that are available click here.


Length: 13.88"/35.3 cm
Diameter: .736"/18.7 mm
Approx. Weight (w/out recovery device): 0.37 oz/10.5 gm
Recommended Engines: 1/2A6 - 2; A3 - 6; A8 - 3; A8 - 5; B4 - 6; B6 - 6; C6 - 7; C12 - 8; D16 - 8
Skill Level: Beginner/Intermediate
Recovery Device: Parachute (18" Mylar®)

What you'll need to build this rocket:

Adhesives – thin viscosity cyanoacrylate ("CA") glue; hobby knife with a sharp #11 blade; sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil.
Recommended, but not required: sanding block; extender tip for cyanoacrylate glue.
Optional: accelerator for cyanoacrylate glue.

What else you'll need to fly this rocket:

Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad